Service|English
当前位置:首页 - 广告物料
    产品名称：LS-2401补点套装

    LS-2401 patch kit is used for solder patch, motherboard support, can be used for all types of electronic components!Patch Pressing (Stainless Steel Thimble, Acrylic Box, Ceramic Sheet, Pure Copper Bead), Made of pure copper, large, medium and small, three kinds of copper bead specifications, can be made between 0.03-0.8mm any size and thickness of the gasket, middle explosion-proof tin gasket and flying wire patch piece 2 in 1, good oxidation resistance effect, good electrical conductivity effect, better electrical performance!



    Chinese English Picture materiali Video material User'sManual
    使用说明:
    1、使用前检查不锈钢顶针的头部是否平整，不平整可在陶瓷片上旋转打磨直至平整和合适的宽度。
    2、把纯铜珠倒在陶瓷片上，使用不锈钢顶针压出不同厚度和大小的垫片即可。
    3、飞线一头放在陶瓷片上，使用不锈钢顶针压扁即可。
    4、可制作0.03-0.8mm之间任何尺寸和厚度的垫片。
    Instructions for use:
    1, check whether the head of the stainless steel thimble is flat before use, if it is not flat, it can be rotated on the ceramic piece until it is flat and suitable.
    2, pour the pure copper beads on the ceramic piece, and use the stainless steel thimble to press out gaskets of different thickness and size.
    3, fly line one end on the ceramic piece, the use of stainless steel thimble can be flattened.
    4, can be produced between 0.03-0.8mm any size and thickness of the gasket.

    右键点击相关图片，保存，即可以下载高清图片使用。

    Right-click on the relevant picture, save, and then you can download the high-definition picture for use.


    Consulting
    服务咨询
    KS产品售后
    KS-After-sales